
Compared to traditional batteries they have numerous advantages:
TLI Premium (professional) batteries stand out compared to other lithium batteries on the market because of their high energy density: weight and size being equal, they can store much higher quantities of energy.
TLI Premium batteries incorporate a sophisticated Battery Management System (BMS) that controls the voltage of each cell during both during charging/discharge, thus increasing its lifespan. The BMS also ensures protection against failure in the event of high temperatures, overloads and excessive discharging.
It’s possible to connect up to 2 batteries in series and up to 3 in parallel (batteries with the same capacity).
Key BMS features:
The BMS also ensures protection against failure in the event of high temperatures, overloads and excessive discharging.
Guaranteed quality:

| Technical Specifications |
TLI Premium 12/104 DIN | TLIPremium 12/120 DIN | TLIPremium 12/150 DIN | TLI Premium 12/200 |
| Rated Voltage | 12,8V | 12,8V | 12,8V | 12,8V |
| Capacity | 104 Ah | 120 Ah | 150 Ah | 200 Ah |
| Energy | 1280 Wh | 1536 Wh | 1920 Wh | 2560 Wh |
| Recommended discharge current @ 25°C | 20 Amp | 24 Amp | 30 Amp | 40 Amp |
| Max continuous discharge current @ 25°C | 100 Amp | 120 Amp | 150 Amp | 200 Amp |
| Recommended charging current @ 25°C | 20 Amp | 24 Amp | 30 Amp | 40 Amp |
| Max charging current @ 25°C | 100 Amp | 120 Amp | 150 Amp | 200 Amp |
| Duration | 2000 cycles @ 80% DOD @25°C with residual energy 80% (charge-discharge 1C) | |||
| Lifespan | 5/7 years | |||
| Charging voltage | 14.6 V | 14.6 V | 14.6 V | 14.6 V |
| Weight | 10,50 Kg | 12,5 Kg | 14.5 Kg | 23,3 Kg |
| Dimensions [mm] (terminals and handles included) | 355x175xH190 DIN L5 | 355x175xH190 DIN L5 | 355x175xH190 DIN L5 | 521x238xH218 |
| Terminal | SAE Automative | SAE Automative | SAE Automative | M8 |
| Temperature | 0 °C / +45 °C -20 °C / +60 °C -10 °C / +50 °C |
0 °C / +45 °C -20 °C / +60 °C -10 °C / +50 °C |
0 °C / +45 °C -20 °C / +60 °C -10 °C / +50 °C |
0 °C / +45 °C -20 °C / +60 °C -10 °C / +50 °C |
| Certifications | IEC62133-2, EN55014-1, EN55014-2 UN38.3, RoHs, Conformità CE, UN ECE R10 | |||
TCP – OLED control panel (with charge indicator and input/output control from storage mode OPTIONAL)
| Dimensions [mm] (Compatible with Berker frames) | 59,5 x 59,5 x H13 |
| Displayed information | Voltage, Current, Power, State of Charge, Alarms |
| Supplied | Ethernet cable (5 m) |
*The BMS system features greatly reduced consumption and is therefore ideal where batteries are installed on vehicles that remain idle for some time. It’s possible to connect up to 4 batteries (with the same capacity) in series or in parallel. The BMS system also allows for smart management in both the charge and discharge phases. In the event of an overvolt (overcharge) the battery automatically disconnects from the charger but remains connected to the load to be powered. When the overload event is over the battery is reconnected to the charger. In the event of an undervolt (excessive discharge) the battery automatically disconnects from the load but remains connected to the charger. When the undervolt event is over the battery automatically starts powering the load again.

| Technical Specifications |
TLI Extra 12/100 | TLI Extra 12/160 | TLI Extra 12/200 |
| Rated voltage | 12,8V | 12,8V | 12,8V |
| Capacity | 100 Ah | 160 Ah | 200 Ah |
| Energy | 1280 Wh | 2048 Wh | 2560 Wh |
| Recommended discharge current @ 25°C | 20 Amp | 32 Amp | 40 Amp |
| Max continuous discharge current @ 25°C | 100 Amp | 100 Amp | 200 Amp |
| Recommended charging current @ 25°C | 20 Amp | 32 Amp | 40 Amp |
| Max charging current @ 25°C | 100 Amp | 100 Amp | 200 Amp |
| Duration | 2000 cycles @ 80% DOD @25°C with residual energy 80% | ||
| Lifespan | 5/7 years | ||
| Charging voltage | 14.6 V | 14.6 V | 14.6 V |
| Weight | 11 Kg | 20,5 Kg | 23,3 Kg |
| Dimensions [mm] | 305 x 169 x H210 | 485 x 170 x H241 | 525 x 238 x H218 |
| Terminal | M8 | M8 | M8 |
| Temperature | 0°C / +45°C during charging -20°C / +60°C during discharging -10°C / +50°C during prolonged storage |
0°C / +45°C during charging -20°C / +60°C during discharging -10°C / +50°C during prolonged storage |
0°C / +55°C during charging -20°C / +60°C during discharging 0°C / +45°C during prolonged storage |
| Certifications | IEC62133-2, EN55014-1, EN55014-2 UN38.3, RoHs, CE Conformity, UN ECE R10 | ||